The water in the oil will cause oxidation, to make the oil to be bad, decreasing the thickness of the lube oil film. Then the denaturation of the oil make it polymerize to form macromolecule. The liquid viscosity will change to be the similar as the organic acid, which make the surface of the metal to be corrosion, lower or lose the oil dielectric strength. The coalescence type oil filter developed by our company has the ability of precision filter and high efficiency dehydration together, which can eliminate grain impurity and emusifying water, free water, its separate speed is several times or more than the traditional separate methods in dealing with the oil that contains lots of water(the max is 15%).
System characteristic:
It has two function of collecting precision filter and high
efficiency, applying advanced coalescence-separate” technique,
aiming at the features of the kerosene, diesel, steam turbine oil,
transformer oil and the difference of the surface tensile to
dehydration, high effect dehydration, especially to separate the
water from the oil. It has the merit of the vacuum method,
centrifugal method unexampled. It can destroy all the oil water
emusifying structure. Coming across the grain filter system for
three times, it can steadily control the medium cleanliness to the
system status to be sure the cleanliness of the oil without the
changing of its physics and chemical feature, extern the service
time of the oil with small energy consumption, low operation cost,
good system configuration and continuous working steadily, which is
suitable to work on line.
Grain filtration system
It adopts the high efficiency material, large filter area design, which can effectively filter extremly small grain impurity to make the oil be in high cleanness.
coalescence dehydration system
Coalescence dehydration system is formed by coalescence filter element, which adopts the special polarity structure to separate the free water and emulsify water in the oil when filter by destroying the coalescence water. It will down to the water to the storage tank by gravitational.
Separate dehydration system
Separate dehydration system is made up of separate filter element, which is made by special drainage material, when oil through the filter element, the water will be block on the surface, and down to the water storage tank by gravitational.
Separate type standard and key technique indexes
Parameter model | LYJ-J-50 | LYJ-J-100 | LYJ-J-150 | LYJ-J-200 | |
Filter medium | Hydraulic pressure oillube oilkerosenedieselsteam turbine oiltransformer oil | ||||
Working pressure | 1MPa | 1MPa | 1MPa | 1MPa | |
Working temperature | 20-70℃ | 20-70℃ | 20-70℃ | 20-70℃ | |
filter precision | NASS class | NASS class | NASS class | NASS class | |
Dehydration ability | ≤100ppm | ≤100ppm | ≤100ppm | ≤100ppm | |
Inlet size | DN32 | DN40 | DN40 | DN50 | |
Exit size | DN32 | DN40 | DN40 | DN50 | |
source | 380V,50HZ | 380V,50HZ | 380V,50HZ | 380V,50HZ | |
Motor power | 1.5Kw | 3Kw | 4.5Kw | 6Kw | |
Outline size | 1500×750×1050 | 1800×1000×1200 | |||
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!